Friendship Machinery Co., Ltd
Friendship Machinery Co., Ltd Welding & Cutting, Quality Is Our Pursuit Of The Eternal Theme !
Add to Cart
Powder Coating Line
Automatic Painting And Spraying Line For Steel Construction Parts
1. Production procedure
Loading the work-piece → Automatic spraying & washing pretreatment → Drying oven → Feed work-piece to spray booth → Feed work-piece to curing oven → Exit the oven and let it cool naturally → Remove the work-piece
| 1 | Main equipment dimension | mm | (L*M*T)4200X1850X2600 |
| 2 | Weight | kg | 6000 |
| 3 | Power supply | 380V 50HZ 75KVA | |
| 4 | Steel wire diameter | mm | 1.8-2.8 |
| 5 | 3D plate defect welding rate | c/o | <=1%(for single swface 30 panel) <=3%(EPS <=80mm) <=3%(for both surface of the 3D plate and the thickness of EPS <=80mm) <=5%(EPS <=100mm) <=5%(for both surface of the 3D plate and the thickness of EPS <=100mm) |
| 6 | GL plate diagonal error | mm | <=5 |
| 7 | Production efficiency | s/step or m2/h | 0.5s/step or 78m2/h 4.5s/step 48m2/h |
| 8 | Stand of forming machine | stands | 19 |
| 9 | Size of material | mm | (600~1000)×(0.4~0.8)×L |
| 10 | Material | EPS,PU,Mineral Wool | |
| 11 | Suitable Material | Colored galvanized steel board | |
| 12 | Controlling system | PLC |
1 The equipment is used for welding 3D structural mesh plate by the slanting stell wires when the upper mesh plate and lower mesh plate and in-between panel of EPS is passed through the equiment.The equiment is also used for welding single surface stell wire mesh plate for external wall heat preservation.
2 Adopt wholly pneumatic operation mode with stable operation,good reliability and long equiment lifetime.
3 Adopt integrated pneumatic wire-clamping device for finishing the forward procedure.
4 Adopt the integrated self-adaptation wire-welding device for finishing the welding procedure.
5 Provice the self-checking function and the failure automatic alarm function with easy poreation adn easy maintenance.
6 Adopt PLC adn touch screen control,and can automatically finish to straighten,weld and cut the stell wire.
7 Can produce two kinds of panels with either dense or sparse insertion.
2. Powder coating plant components list
● Spraying & washing pretreatment
● Drying oven
● Powder spray booth
● Mono-cyclone recovery system
● Filters recycle system
● Powder curing oven
● Curing oven heating system
● Powder feed centre: 2 sets
● Manual spray gun with controller
● Automatic spray guns with controller
● Reciprocators (3.0m travel)
● Suspension type conveyor line with drive
● Electronic control system: 1 set
