Friendship Machinery Co., Ltd
Friendship Machinery Co., Ltd Welding & Cutting, Quality Is Our Pursuit Of The Eternal Theme !
Add to Cart
Through Type H Beam Shot Blasting Machine / Sand Blasting Equipment For H Section Steel
1. Major technical parameter
| Work-piece | Work-piece dimension (width × height) | 800×1600mm | |
| Length of the woke-piece | 16000mm | ||
| Speed of the work-piece | 400-2500mm/min | ||
| Impeller head | Type | Q034 | |
| Quantity | 8 | ||
| Shot blasting capacity | 8×280Kg/min | ||
| Power rate | 8×11KW | ||
| Elevator | Lifting capacity | 120t/h | |
| Power rate | 7.5kw | ||
| Longitudinal spiral conveyer | Conveying capacity | 120t/h | |
| Power rate | 5kw | ||
| Transverse spiral conveyer | Conveying capacity | 120t/h | |
| Power rate | 5kw | ||
| Separator | Separating capacity | 120t/h | |
| Ball-clearing system | Power rate | 11kw | |
| Load-carrying capacity | 4237m3/h | ||
| Input/output roller way | Capacity | 1000kg/m | |
| Power | 2×2.2kw | ||
| Delivery speed | 400-4000mm/min | ||
| Length of the roller | 13000mm | ||
| Dust removal system | Blowing rate | 16000 m3/h | |
| Power | 15kw | ||
| Total power | About 140kw | ||
2. Provide goods and compose parts
● Shot-blasting main frame: clean part, longitudinal spiral conveyer, Q034 impeller head 8, chromium iron board.
● Roller way: 26m former-and-back roller way, motor deceleration machine.
● Ball recycling system: transverse spiral conveyer, elevator, separator, ball supply machine.
● Ball-clearing system: up nozzle, lateral nozzle, piping.
● Dust removal system: dedusting piping, valve, bag, centrifugal.
● Electric system: electric control box, AC inverter, receive line box, separate line box.
● Spare parts: buttons switch*5, steel ball separate cylinder*2, gas valve.
3. Performance
HP8016 H beam shot blasting machine is specially designed for the surface cleaning and intensifying of H beam. It can intensifying roughness and increase the adhesion effect. There are 8 shot-blasting device and anti-corrosion device on both sides of the blasting area. They will be installed at the best piece according to the characteristics of H beam. There is a protecting cover lining on the internal wall of the box. Which is replace. The dust-removing system adopts the internationally advanced drum-type device, characterized by high efficient, low running resistance, small volume and light weight .the dust emission meets the relevant requirements of the country regarding environmental protection.
4. Technical files
● Using manual of the machine (Include electrical schematic).
● Shipping list.
● The certification of the machine.
● The basis of drawing of the machine.
● Impeller head using manual, inverter using manual.
